Vodennikov Sergey Anatoliyovych

Accounts of a scientist

Theses:

Candidate's thesis in the specialty - 05.16.03 "Metallurgy of non-ferrous and rare metals": "Investigation of the processes of alloy formation during the separation of metals on a steel cathode by electrolysis of ionic melts", year of defense - 1994.
Doctoral dissertation in the specialty - 05.02.01 "Materials science": "Scientific and technological basis of the formation of composite coatings from ionic melts for the predicted provision of functional properties of porous materials", year of defense - 2010.

Scientific interests:

Strengthening technologies of foundry equipment
Strengthening of porous materials to increase operational characteristics

Main scientific works (publications):

Vodennikova, O.S. Measures to modernize the industrial department of the agglomeration factory PJSC "KAMET-STEEL" [Text] / O.S. Vodennikova, S.A. Vodennikov, Y.V. Bondarenko // Metal and Casting of Ukraine. – 2023. – Volume 31. – No. 1 (332)'. - P.8-18.
Vodennikova, O.S. Analysis of measures to modernize the industrial department of the agglomeration factory PJSC "KAMET-STEEL" [Text] / O.S. Vodennikova, S.A. Vodennikov, Y.V. Bondarenko// Bulletin of Kryvyi Rih National University: collection of scientific papers. – 2022. – No. 55. – C. 49–58.
Vodennikova, O.S. Growing of the aircraft part "Whirlwinder" from heat-resistant alloy Inconel 718 by the technology of selective laser sintering [Text] / O.S. Vodennikova, S.A. Vodennikov, M.O. Koval M.O. // "Materials science and metal processing". – 2022. – No. 2(102). - P. 12-21
Vodennikova, O. S. Investigation of Mechanical Properties and Structure of Inconel 718 Alloy Obtained by Selective Laser Sintering from Powder Produced by 'LPW' [Text] / O. S. Vodennikova, M. O. Koval, S. A. Vodennikov // Metal physics and new technologies. — 2021. — T 43. — Issue 7. — C. 925–937.
Tarasov, V. K. Improvement of methods of preparing molds for steel casting [Text] / V. K. Tarasov, O. S. Vodennikova, S. A. Vodennikov, E. A. Manidina // Metal and Casting of Ukraine. - 2021. – Vol. 29. – No. 3. – C. 28-35.
S.A. Vodennikov S.A., V.O. Skachkov, Vodennikova O.S. Protective and strengthening coatings on reinforcing steel // Metal science and metal processing. - 2020. No. 4(96). P.39-46.
Vodennikov, S.A. Management of risks for the preservation of people / S.A. Vodennikov, V.K. Tarasov, V.R. Rumyantsev, T.V. Shklyar // Humanitarian Bulletin of the Zaporizhzhya State Engineering Academy: collection of scientific works / Gol. ed. Doctor of Philosophy V.G. Voronkova. Issue 67. - Zaporizhzhia: ZDIA, 2016. - P.267-275.
Vodennikov, S.A. The influence of drawing methods on the functional characteristics of precision aluminum tubes / S.A. Vodennikov, V.A. Skachkov, V.I. Ivanov, O.S. Vodennikova. // Technological audit and production reserves. - Kharkiv: State Enterprise "Technological Center", 2014. - No. 3/2(17). - P. 4-7.
Vodennikov, S.A. On the modeling of gas-phase compaction of carbon-carbon composites / S.A. Vodennikov, V.O. Skachkov, V.I. Ivanov, Y.V. Moseyko // Eastern European Journal of Advanced Technologies // Kharkiv, 2/5 (62) 2013. - P.16-19.
Vodennikov, S.A. Influence of drawing methods on the functional characteristics of precision aluminum tubes / S.A. Vodennikov, V.A. Skachkov, V.I. Ivanov, O.S. Vodennikova // Technological audit and production reserves. - Kharkiv: State Enterprise "Technological Center", 2014. - No. 3/2(17). - P. 4-7.
List of all scientific publications by year

Participation in conferences:

Vodennikova, O.S. Modernization of the agglomeration factory of PJSC "KAMET-STEEL": technological, ecological and economic aspects [Text] / O.S. Vodennikova, S.A. Vodennikov // Development of industry and society: international scientific and technical conference (Kryvyi Rih, May 23-25, 2023). – 2023. – P. 8.
Vodennikova, O.S. Study of the mechanical properties of the Inconel 718 alloy obtained by the method of selective laser sintering from the powder of LPW Technology [Text] / O.S. Vodennikova, M.O. Koval, S.A. Vodennikov / Development of industry and society: international scientific and technical conference (Kryvyi Rih, May 23-25, 2023). – 2023. – P. 28.
Vodennikova, O.S. Measures for energy saving in steel smelting in electric furnaces [Text] / O.S. Vodennikova, S.A. Vodennikov, I.E. Skidin. Zaporizhzhia: Zaporizhzhya Polytechnic University. — 2022. — P. 22–23.
Vodennikova, O.S. Analysis of measures to modernize the industrial department of the agglomeration factory PJSC "KAMET-STEEL" [Text] / O.S. Vodennikova, S.A. Vodennikov, Y.V. Bondarenko// Bulletin of Kryvyi Rih National University: collection of scientific papers. – 2022. – No. 55. – C. 49–58.
Vodennikov, S.A. Energy and resource conservation in the metallurgical industry: basic principles, trends and innovations [Electronic resource] / S.A. Vodennikov, O.S. Vodennikova, M.S. Kurinnyi, S.M. Kalashnikov // Science Week-2022. Abstracts of reports of the scientific and practical conference, Zaporizhzhia, April 18–22, 2022 / Redcol. :IN. V. Naumyk (corresponding editor) Electron. data. – Zaporizhzhia: Zaporizhzhya Polytechnic University, 2022. – C. 257-260.
Vodennikova, O. S. Possibilities of cryogenic blasting technology as a modern method of decontamination of steel casting molds [Text] / O. S. Vodennikova, S. A. Vodennikov, E. A. Manidina // Modern technologies of the industrial complex - 2021: materials of the VII international scientific and practical conference (Kherson, September 1–10, 2021). Kherson: KhNTU, 2021. — C. 62–67.
Vodennikov S.A. The quality of education as a condition for the training of competent and professional specialists for the information society - Theoretical and practical foundations of the evolution from the information society to the "Knowledge Society" and to the smart society: challenges and opportunities of the fourth industrial revolution. Materials of the International Scientific and Practical Conference, April 23-24, 2018. – Zaporizhzhia: ZDIA, 2018. – P. 18-21.

Year of commencement of activities at the university: 2019.

Advanced training (internship):

Kryvyi Rih National University, Department of Metallurgy of Ferrous Metals and Foundry Production (from 04/01/2022 to 07/01/2022, amount of 180 hours / 6 credits), internship topic "Consider current issues of modern teaching methods and innovative technologies in higher education in the field of mechanical engineering, in particular in metallurgy and materials science", certificate no. 495-2022 dated July 1, 2022.

Contacts

Address:

69063, Ukraine, Zaporizhzhia, 64 Zhukovsky St

Classroom:

225

Phone:

+380(61)7698594

e-mail:

s_vodennikov@i.ua

Accounts of a scientist

Scientist account (ORCID): 0000-0002-5563-5244

Scientist account (Scopus): 57254639800

Scholar's account (Google Scholar): https://scholar.google.com.ua/citations?user=N3UBzjMAAAAJ&hl=uk

Theses:

Candidate's thesis in the specialty - 05.16.03 "Metallurgy of non-ferrous and rare metals": "Investigation of the processes of alloy formation during the separation of metals on a steel cathode by electrolysis of ionic melts", year of defense - 1994.

Doctoral dissertation in the specialty - 05.02.01 "Materials science": "Scientific and technological basis of the formation of composite coatings from ionic melts for the predicted provision of functional properties of porous materials", year of defense - 2010.

Scientific interests:

Strengthening technologies of foundry equipment

Strengthening of porous materials to increase operational characteristics

Main scientific works (publications):

Vodennikova, O.S. Measures to modernize the industrial department of the agglomeration factory PJSC "KAMET-STEEL" [Text] / O.S. Vodennikova, S.A. Vodennikov, Y.V. Bondarenko // Metal and Casting of Ukraine. – 2023. – Volume 31. – No. 1 (332)'. - P.8-18.

Vodennikova, O.S. Growing of the aircraft part "Whirlwinder" from heat-resistant alloy Inconel 718 by the technology of selective laser sintering [Text] / O.S. Vodennikova, S.A. Vodennikov, M.O. Koval M.O. // "Materials science and metal processing". – 2022. – No. 2(102). - P. 12-21

Tarasov, V. K. Improvement of methods of preparing molds for steel casting [Text] / V. K. Tarasov, O. S. Vodennikova, S. A. Vodennikov, E. A. Manidina // Metal and Casting of Ukraine. - 2021. – Vol. 29. – No. 3. – C. 28-35.

S.A. Vodennikov S.A., V.O. Skachkov, Vodennikova O.S. Protective and strengthening coatings on reinforcing steel // Metal science and metal processing. - 2020. No. 4(96). P.39-46.

Vodennikov, S.A. On the modeling of gas-phase compaction of carbon-carbon composites / S.A. Vodennikov, V.O. Skachkov, V.I. Ivanov, Y.V. Moseyko // Eastern European Journal of Advanced Technologies // Kharkiv, 2/5 (62) 2013. - P.16-19.

List of all scientific publications by year

Participation in conferences:

Vodennikova, O.S. Measures for energy saving in steel smelting in electric furnaces [Text] / O.S. Vodennikova, S.A. Vodennikov, I.E. Skidin. Zaporizhzhia: Zaporizhzhya Polytechnic University. — 2022. — P. 22–23.

Year of commencement of activities at the university: 2019.

Advanced training (internship):

Contacts

Accessibility

Events Calendar