Levytska Tetiana Ihorivna

Levitska T.I. Construction of the global model of the nose strut compartment of the aircraft chassis and its comparison with the local model / T.I. Levitska, I.S. Pozheva, O.D. Manzhos // New materials and technologies in mechanical engineering - 2025. - No. 1. - P. 50-56. https://doi.org/10.15588/1607-6885-2025-1-7

Pozhuieva, I.S. Analysis of mathematical methods for describing financial flows: dynamic modeling of an innovative company / I.S. Pozhuieva, T.I. Levytska // Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2024, No. 5 - P. 177-184 (Scopus)

Levitska T.I. Comparison of analytical and numerical stress-strain calculations condition of the wall of the nose strut compartment of the aircraft landing gear / T.I. Levitska, I.S. Pozheva, O.V. Mitryashkin, O.D. Manzhos // Herald of DNU. Section: Rocket and space technology. - No. 4. - T. 32. - Dnipro: Dnipro National University named after O. Honchara, 2023. - P. 83-91. http://doi.org/10.15421/452332

Левицька, Т. І. Розрахунок напружено-деформованого стану носової стійки шасі літака з радіусним переходом за товщиною при побудові локальної моделі/ Т. І.Левицька, І. С. Пожуєва, О. В. Митряшкін, О. Д. Манжос // Нові матеріали і технології в металургії та машинобудуванні. –Запоріжжя: НУ "Запорізька політехніка" – 2023. – № 3. – С.65-71. http://doi.org/10.15588/1607-6885-2023-3-10

Pozhuyeva I. S. Stress-deformed state of the shell with a small initial deflection under the action of the end load / I. S. Pozhuyeva, T. I. Levitskaya // New materials and technologies in metallurgy and mechanical engineering. – 2021. – no. 1. - P. 67-72.

Levada, V.S. Integral presentation of the discontinuous solution of the problem describing the generalized flat electroelastic state of the piezoelectric plate [Text] / V.S. Levada, T.I. Levitskaya, I.S. Pozhueva, V.K. Khizhnyak // Bulletin of NUZP. Physical and mathematical sciences. – 2018. – No. 1. – P. 78-84.

Levada, V.S. Construction of the matrix of fundamental solutions of the system of equations describing the generalized flat electroelastic state of the piezoelectric plate [Text] / V.S. Levada, T.I. Levitskaya, I.S. Pozhueva, V.K. Khizhnyak // Bulletin of NUZP. Physical and mathematical sciences. - 2017. - No. 1. - P. 252-261.

Levitska, T.I. Research of loaded shells of rotation supported by frames of different shapes / T.I. Levitska, I.S. Pozheva // New materials and technologies in metallurgy and mechanical engineering. – 2016. – No. 1. – P.97-104.

Levada, V.S. Integral representation of the discontinuous solution of the plane problem of elasticity theory for anisotropic medium [Text] / V.S. Levada, T.I. Levitska, V.K. Khizhnyak // Bulletin of NUZP. Physical and mathematical sciences. – 2016. – No. 1. - P. 146-152.

Levada, V. S. Integral representation discontinuous solution of the problem of bending of anisotropic plates/ V. S. Levada, V. K. Khizhnyak, T.I. Levitskaya // New materials and technologies in metallurgy and mechanical engineering. – 2015. – No. 1. - P.107-114.

Pozheva, I.S. Sociodynamic economic-mathematical model of the study of complex migration phenomena [Text] / I.S. Pozheva, O.V. Korotunova, T.I. Levytska // Bulletin of NUZP. Economic sciences. – 2014. – No. 2 (22) – P. 107-115. http://eir.zntu.edu.ua/handle/123456789/261

Levada, V.S. Bending of a semi-infinite anisotropic plate with a hinge-supported edge under the action of a concentrated load [Text] / V.K. Khizhnyak, V.S. Levada, T.I. Levitskaya // Methods of solving applied problems of the mechanics of a formable solid body. – 2012. – Issue 13. - pp. 254-259. http://eir.zntu.edu.ua/handle/123456789/258

V.S. Levada, V.K. Khizhnyak, T.I. Levitska Bending of a semi-infinite anisotropic plate with a rigidly fixed edge under the action of a concentrated load // New materials and technologies in metallurgy and mechanical engineering. - 2011. - No. 2. - P. 117-119.

Khizhnyak V.K., Levada V.S., Levitskaya T.I. Bending of a plate loaded with moving heat sources // New materials and technologies in metallurgy and mechanical engineering. - 2011. - No. 1. - P. 111-114.

Pozheva I.S., Levitska T.I. Statistical analysis of migration processes in the Zaporizhzhia region // Bulletin of NUZP, Economic Sciences. – Zaporizhzhia: NUZP. – 2010. – No. 1(5). - P.172-178.

Ivanov N.N., Levitskaya T.I. Dynamic modeling of assortment policy using fuzzy sets // Business-inform (HNEU MES of Ukraine). – 2009. – No. 2 – C. 33-36.

Levitska T.I., Chumachenko Y.V. . Calculation of the stress state of a closed composite shell of rotation, which is under the action of an axisymmetric force load and temperature // Vestnik dvigatelestroeniya. – 2008. – No. 2. – P.40-44. http://eir.zntu.edu.ua/handle/123456789/254

Chumachenko Ya.V. , Levytskaya T.I. . To calculate stress intensity coefficients in problems of torsion of polygonal rods weakened by longitudinal cuts // New materials and technologies in metallurgy and mechanical engineering. - 2008. - No. 2. - P. 130-133.

Levitska T.I. Optimization of the total mass of columns supporting the shell // New materials and technologies in metallurgy and mechanical engineering. – 2004. – No. 2. - pp. 93-95.

Levitska T.I. Calculation of natural frequencies of oscillations of composite shells of rotation // New materials and technologies in metallurgy and mechanical engineering. – 2002. – No. 1. - pp. 96-99.

Левицька Т.І., Сисоєв Ю.О. Оптимізація маси замкненої оболонки обертання при заданій власній частоті коливань// Вісник Запорізького державного університету. – 2001. – №1. – С.85-89.

Сисоєв Ю.О., Левицька Т.І. Вибір форми шпангоутів для підкріплення замкненої оболонки обертання// Вісник Запорізького державного університету. – 1998. – № 2. – С.136-139.

Левицька Т.І. Розрахунок оболонок обертання, замкнених у вершині, із шпангоутами малих розмірів // Вісник Запорізького державного університету. – 1998. – № 2. – С.73-78.

Левицька Т.І. Сисоєв Ю.О. Розрахунок резервуара, наповненого зрідженим газом// Вісник Запорізького державного університету. – 1998. – № 1. – С.49-53.

Levitskaya T.I. The use of superelements and pole elements in the calculation of the stress-strain state of the shells of rotation // Bulletin of the Dnipropetrovsk University. Ser. Mechanics. – Issue 1, volume 1. - 1998. - P.149-153.

Levitska T.I. Iterative method of calculation of sectionally uniform-strength shells of rotation taking into account structural features // New materials and technologies in metallurgy and mechanical engineering. - 1999. - No. 2. - P.73-74.

Levitskaya T.Y., Sysoev Yu.A. Calculation of the thicknesses of the shells of rotation according to the elastic limit // Problems of computational mechanics and strength of structures: Collection. of science pr. - Dnipropetrovsk: Educational book, 1998. - vol.4. - P.90-96.

Sysoev Yu.A., Levitskaya T.I. Calculation of composite shells of rotation with frames of complex shape // Strength problems. - 1998. - No. 6. - P.63-68.

Levitskaya T.I. Calculation of the stress-strain state of composite shells of rotation // Prydniprovskyi scientific bulletin. Ser. Mechanics and mathematics. - 1997. - No. 12. - P.15-16.