Tryshyn Pavlo Romanovych

1. Vnukov Y., Tryshyn P., Kozlova O., Dyadya S. Cutter-oscillator with single-degree-of-freedom for the study of cutting vibrations. Strojnícky časopis – Journal of Mechanical Engineering. 2024. Vol. 74(1), P. 169-180. URL: https://doi.org/10.2478/scjme-2024-0017. 2. Honchar N., Tryshyn P., Pavlenko D., Stepanov D., Khavkina O. Model of influence of the machined material properties on wear of the polymeric-abrasive tool filaments. Strojnícky časopis – Journal of Mechanical Engineering. 2023. Vol. 73(1), P. 67-85. URL: https://doi.org/10.2478/scjme-2023-0006. 3. Dyadya S., Vnukov Y., Kozlova O., Trishyn P. Regularities of oscillations during turning and end milling. In Grabchenko’s International Conference on Advanced Manufacturing Processes Cham: Springer Nature Switzerland. 2023. P. 136-144. URL: https://doi.org/10.1007/978-3-031-42778-7_13 4. Honchar, N., Tryshyn, P., Stepanov, D., Khavkina, O. Effect of Abrasive Finishing on the Electrical Parameters of SB and Rectangular Waveguides. Advances in design, simulation and manufacturing IV. DSMIE 2021. Lecture Notes in Mechanical Engineering. 2021. №2. P. 395–404. http://dx.doi.org/10.1007/978-3-030-77719-7_39. 5. Tryshyn, P., Honchar, N., Kondratiuk, E., & Stepanov, D. Development of technological restrictions when operating disc polymer-abrasive brushes. Eastern-European Journal of Enterprise Technologies. 2020. Vol. 6, – No 1(108). P. 27–33. DOI: https://doi.org/10.15587/1729-4061. 2020.212820. 6. Honchar, N., Kondratiuk, E., Stepanov, D., Tryshyn, P., Khavkina, O. Estimation of temperature levels in the area of polishing with polymer-abrasive brushes. Advances in design, simulation and manufacturing. DSMIE 2019. Lecture Notes in Mechanical Engineering. 2019. №2 pp. 95–103. DOI: https://doi.org/10. 1007/978-3-030-22365-6_10. 7. Vnukov Y., Dyadya S., Kozlova O., Tryshyn P., Zubarev A. Influence of cutting time on types of oscillations during blade processing. UJMEMS. 2023. Vol. 9, no. 1. P. 53-66. URL: https://doi.org/10.23939/ujmems2023.01.053. 8. Dyadya S., Kozlova O., Tryshyn P., Brukhno E., Yakhno D. Influence of radial depth of cut on initial conditions of oscillations during end-milling of thin-walled parts. Cutting & Tools in Technological System. 2023. no. 99. P. 153-164. URL: https://doi.org/10.20998/2078-7405.2023.99.14 9. Trishin, P. R., Gonchar, N. V., Tereshchenko, K. O. (2020). Automation of finishing of rectangular corner waveguides of the S-band. Aerospace Engineering and Technology. – 2020. – No. 6 (166). P. 45–53. DOI: https://doi.org/10. 32620/aktt.2020.6.05 10. Trishin, P. R., Gonchar, N. V. (2019). Comprehensive assessment of factors influencing dimensional wear of disk brush polymer abrasive tools. Bulletin of Engine Engineering, (1). DOI: https://doi.org/10.15588/1727-0219-2019-1-11

1. Trishyn P. R., Gonchar N. V. Finishing the channel of corner waveguides by polishing with polymer-abrasive brushes: monograph. Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2023. 134 p. 2. Stepanov D. M., Gonchar N. V., Kondratyuk E. V., Trishyn P. R. Features of finishing complex-profile and thin-walled aviation parts with brush polymer-abrasive tools: monograph. Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2022. 200 p.

1. Method of polishing rectangular waveguides on milling machines with numerical program control: pat. 156185 Ukraine: MPK(2024.01) V24V 1/00, V24V 29/00. No. u202304051; appl. 28.08.23; publ. 22.05.24, Bull. No. 21. 4 s 2. Oscillator cutter for research of the cutting process: pat. 157016 Ukraine: MPK(2024.01) V23V 27/00. No. u 2024 01426 ; appl. 18.03.2024; publ. 28.08.24, Bull. No. 35. 4 s3. Method of finishing the channel of sectional curved waveguides: pat. 152729 Ukraine: MPK(2023.01) V24V1/00, V24V29/00, V24V29/02. No. u202202985; appl. 17.08.22; publ. 05.04.23, Bull. No. 14. 4 s 4. Machine for polishing the channel of rectangular waveguides: pat. 152794 Ukraine: MPK(2023.01) D24D29/00, D23Q35/00. No. u202203432; appl. 19.09.22; publ. 12.04.23, Bull. No. 15. 4 p 5. Device for testing fibers of brush tools for thermomechanical fatigue: pat. No. 146708 Ukraine: MPK G01N 3/00. No. u2020 07083; appl. 05.11.20; publ. 10.03.21, Bull. No. 10. 4 p.

1. Dyadya S.I., Kozlova O.B., Trishin P.R., Yakhno D.A., Karamushka D.R. Using the patterns of oscillations during cutting to control their intensity: materials of the XII International Scientific-Practical Conference. conf., Ivano-Frankivsk - Yaremche, February 5-9, 2024 Ivano-Frankivsk: Printing house «Foliant», 2024. P. 85–87. 2 .Dyadya S.I., Kozlova O.B., Tryshyn P.R., Mazurenko M.A. On the role of free vibrations in the formation of a trace for regenerative self-oscillations. Information society: technological, economic and technical aspects of formation: materials of the International Scientific Internet Conf., Ternopil, Ukraine - Perevorsk, Poland, February 6-7, 2023 Ternopil: FO-P Shpak V.B., 2023. Issue 73. P. 166-167. URL: http://www.konferenciaonline.org.ua/ua/article/id-918/. 3. Dyadya S.I., Kozlova O.B., Tryshyn P.R., Yakhno D.A. Control of vibrations during end milling by dividing them into high-speed zones. KZYATPS – 2023: materials of the abstracts of the XIII International Scientific and Practical Conference, Chernihiv, May 25–26, 2023. Chernihiv: National University «Chernihiv Polytechnic», 2023. T. 1. P. 94-95. URL: https://conference-chernihiv-polytechnik.com/wp-content/uploads/2023/06/....4. Tryshyn P.R., Marchenko M.V. Influence of the size of the cutter wear area on the level of vibration during turning. Innovative development of science, technology and education : proceedings of the 2nd International scientific and practical conference, Vancouver, Canada, 16-18 November 2023. Perfect Publishing. 2023 P. 132-135 URL: https://sci-conf.com.ua/wp-content/uploads/2023/11/INNOVATIVE-DEVELOPMEN.... 5. Tryshyn P.R., Kozlova O.B., Sukhin O.S. The analysis of studies on the determination of cutting thickness in regenerative vibration. Topical aspects of modern scientific research : proceedings of the 3rd International scientific and practical conference, Tokyo, Japan, 23-25 November 2023. CPN Publishing Group. 2023. P. 141-144. URL: https://sci-conf.com.ua/wp-content/uploads/2023/11/TOPICAL-ASPECTS-OF-MO...