Pleskach Volodymyr Mykhailovych

Candidate's thesis in the specialty 05.02.04 «Friction and wear in machines»: «Study of gas-abrasive wear of structural materials for compressor blades», year of defense - 1973, Kyiv Institute of Civil Aviation Engineers (Kyiv)

Strength and wear of machine parts;

Equipment and technologies for manufacturing products from powder and composite materials;

Thermal processes in the production of composite materials;

Standardization of Ukrainian scientific and technical terminology.

Pleskach V.M. Scientific and technical terminology in the field of composite materials, «Standardization, certification, quality» No. 1 (119) 2020 p. 25-30.

Pleskach V.M., Olshanetsky V.Yu. The most common language errors in scientific literature. «New materials and technologies in metallurgy and mechanical engineering», No. 1’2020, pp. 86-88

Pleskach V.M., Olshanetsky V.Yu. On the methodology for designing and using powder sliding bearings. «New materials and technologies in metallurgy and mechanical engineering», No. 2’2020. pp. 45-49

Pleskach V.M., Olshanetsky V.Yu. Optimization of the design of mold matrices, «New materials and technologies in mechanical engineering and metal.» No. 1’2021 pp. 35-40.

Pleskach V.M. Using standard terminology in powder metallurgy. «New materials and technologies in mechanical engineering and metal.» No. 1'2022 p. 76-78

Pleskach V.M., Akimov I.V. Destruction and increase in strength of powder products «New materials and technologies in metallurgy and mechanical engineering». 3’2023, p. 85-89.

Vinichenko V. S., Pleskach V. M., Ershov A. V., Volkov G. P., Ivanchenko E. Yu. Research of influence of structure of fibrous composites on their mechanical properties. «New materials and technologies in metallurgy and mechanical engineering». 1’2024, p. 18-24.

Pleskach V. M., Akimov I. V., Kyrylakha S. V. Selection of heat-insulating material of molds for manufacturing products from composite materials. «New materials and technologies in metallurgy and mechanical engineering» No. 2’2024, p. 72-79.

Volodymyr Pleskach. Reliability of machine parts at gas-abrasive wear [Text] / Volodymyr Pleskach, Ivan Akimov // New materials and technologies in metallurgy and mechanical engineering: scientific journal / Founder Zaporizhzhia Polytechnic National University. Zaporizhzhia: NU «Zaporizhzhia Polytechnic» - Bimonthly. – ISSN1607-6885 - 2025 - No. 1 - P.45-49.

Pleskach Volodymyr. Protection of machine parts made of aluminum alloys from gas-abrasive wear / Pleskach Volodymyr, Akimov Ivan, Kyrylakha Svitlana// New materials and technologies in metallurgy and mechanical engineering. – 2025. – No. 4. – P. 32–38.

Pleskach V.M. Scientific and technical terminology in the field of composite materials. Standardization, certification, quality - 2020 - No. 1 (119) P. 25-30. (Specialized edition).

Pleskach V.M., Olshanetsky V.Yu. The most common language errors in scientific literature. New materials and technologies in metallurgy and mechanical engineering. - 2020. – No. 1. - P.86-88. (Specialized edition).

Pleskach V.M., Olshanetsky V.Yu. On the methodology for designing and using powder sliding bearings. New materials and technologies in metallurgy and mechanical engineering. - 2020. – No. 2. - P.45-49. (Specialized edition).

Pleskach V.M., Olshanetsky V.Yu. Optimization of the design of mold matrices. New materials and technologies in metallurgy and mechanical engineering. - 2021. - No. 1. - P.35-40. (Professional publication).

Pleskach V.M. Use of standard terminology in powder metallurgy. New materials and technologies in metallurgy and mechanical engineering. - 2022. - No. 1. - P.76-78. (Professional publication).

Pleskach V.M., Akimov I.V. Destruction and increase in strength of powder products. New materials and technologies in metallurgy and mechanical engineering. 2023. - No. 3. - P. 85-89. (Professional publication).

Vinichenko V.S. Research on the influence of the structure of fibrous composites on their mechanical properties / V.S. Vinichenko, V.M. Pleskach, A.V. Ershov, G.P. Volkov, E.Yu. Ivanchenko // New materials and technologies in metallurgy and mechanical engineering. - 2024. - No. 1. - P. 18-23. (Specialized publication).

Pleskach V. M., Akimov I.V., Kyrylakha S.V. Selection of heat-insulating material of molds for the manufacture of products from composite materials. New materials and technologies in metallurgy and mechanical engineering. 2024. - No. 2 - P. 72-79. . (Specialized publication).

9. Volodymyr Pleskach. Reliability of machine parts during gas-abrasive wear [Text] / Volodymyr Pleskach, Ivan Akimov // New materials and technologies in metallurgy and mechanical engineering: scientific journal / Founder Zaporizhzhia Polytechnic National University. Zaporizhzhia: NU «Zaporizhzhia Polytechnic» - Bimonthly - ISSN1607-6885 - 2025 - No. 1 - P.45-49. (Professional publication).

2022 - advanced training in the program «Technology of mechanical engineering and metal processing using special technologies», on the topics: «Technology of structural materials», «Materials science», «Interchangeability, standardization and technical measurements», «Engineering and computer graphics», «Metrological support of scientific research», «Laser technologies and physical and technical processing methods»; Cherkasy State Technological University, Cherkasy (180 hours)

Pleskach V.M., Akimov I.V., Mityaev O.A. Technological methods of production of machine parts blanks: Textbook / ed. by Assoc. Prof. V.M. Pleskach. – Zaporizhzhia: Prosvita, 2013. – 372 p., ill. 146.

Pleskach V. Two dictionaries. Bulletin of the National University «Lviv Polytechnic» No. 620 «Problems of Ukrainian terminology», Lviv, September 24-30, 2008. Lviv, Lviv Polytechnic Publishing House, 2008, pp. 148-152.

Pleskach V. Some materials science terms-definitions. Collection of abstracts of the XIV International Scientific Conference «Problems of Ukrainian Terminology SlovoSvit 2016» Lviv September 29 - October 1, 2016 Lviv, Lviv Polytechnic Publishing House, 2016, pp. 68-72.

Pleskach V.M. «High-temperature composite materials». XIV International Scientific and Technical Conference «New Steels and Alloys and Methods of Their Processing to Increase the Reliability and Durability of Products». October 8-10, 2019. Zaporizhzhia, NU «ZP».

Shyrokobokova N. V., Pleskach V. M. Promising composite materials for heat-resistant machine parts //Priority directions of sciense and technology development. Abstracts of the 1st International scientific and practical conference. SPC «Sci-conf.com.ua». Kyiv, Ukraine. 2020. Pp. 280-285. URL: https//sci-conf.com.ua/i-mezhdunarodnaya-nauchno-prakticheskaya-konferentsiya- priority-directions-of-sciense-and-technology-development-27-29-sentyabrya-2020-goda-Kyiv-ukraina-arhiv/

Shyrokobokova N. V., Kapustyan O. E., Pleskach V. M., Ryzhova O. V. Research on the influence of the granulometric composition of the charge on the properties of the VT1-0 alloy. Collection of abstracts of the reports of the International Scientific and Technical Conference «Machines and Technologies of Pressure Processing of Materials» October 20–22, 2020, Zaporizhzhia, 2020, pp. 45-47.

Pleskach V.M. Powder bearings. «Science Week - 2021». Collection of abstracts of the annual scientific and practical conference April 19-23, 2021. Electronic edition DVD-ROM. p. 112-114.

Shyrokobokova N. V., Pleskach V. M. The influence of technological factors on the properties of products from VT1. Collection of abstracts of reports of the II International scientific and technical conference «Prospects for the development of mechanical engineering and transport - 2021» May 13-15, 2021 Vinnytsia. 2021. P. 139-140.

Pleskach V. M. Analysis of thermal calculations in the formation of composite materials. Collection of materials of the 15th International Scientific and Technical Conference «New Steels and Alloys and Methods of Their Processing for Increasing the Reliability and Durability of Products - 2022». November 8-9, 2022. Electronic edition on DVD-ROM. Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2022. P. 122-125

Pleskach, V.M. Manufacturing of products by vacuum forming [Text] / V.M. Pleskach, A.I. Sokolsky //Science Week-2023. Faculty of Construction, Architecture and Design. Abstracts of reports of the scientific and technical conference, Zaporizhzhia, April 24-28, 2023 [Electronic resource] / Editor: V. Shalomeev (editor-in-chief) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2023. – P.172-173

Pleskach, V.M. Molds for the manufacture of products by pressing [Text] / V.M. Pleskach, V.G. Pylypenko // Science Week-2023. Faculty of Construction, Architecture and Design. Abstracts of the scientific and technical conference, Zaporizhzhia, April 24-28, 2023 [Electronic resource] / Editor: V. Shalomeev (editor-in-chief) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2023. – P.174-175

Pleskach, V.M. Interchangeability in production and repair [Electronic resource] / V.M. Pleskach, V.V. Demyanenko // Science Week-2024. Faculty of Construction, Architecture and Design. Abstracts of the scientific and practical conference, Zaporizhzhia, April 15–19, 2024 [Electronic resource] / Editor: Vadym SHALOMIEV (editor-in-chief) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2024. – P. 125–126.