Honchar Natalia Viktorivna

1. Honchar N., Tryshyn P., Stepanov D., Khavkina O. Effect of Abrasive Finishing on the Electrical Parameters of S-band Rectangular Waveguides. Advances in design, simulation and manufacturing IV. DSMIE 2021. Lecture Notes in Mechanical Engineering. 2021. №2. P. 395–404. DOI: https://doi.org/ 10.1007/978-3-030-77719-7_39. 2. Trishyn P. R., Gonchar N. V., Tereshchenko K. O. Automation of finishing processing of rectangular S-band corner waveguides. Aerospace engineering and technology. 2020. No. 6 (166). C. 45–53. DOI: https://doi.org/10.32620/aktt.2020.6.05. Loskutov S., Ravlenko D., Stepanov D., Honchar N., et. al. Research on the Energy State of the Surface of Alloys for Gas-Turbine Engine Blades. Springer International Publishing AG, part of Springer Nature 2020 V. Ivanov et al. (Eds.): DSMIE. 2020. LNME. R. 150–158. DOI: https://doi.org/10.1007/978-3-030-50491-5_15. 3. Tryshyn P, Honchar N., et. al. Development of technological restrictions when operating disc polymer-abrasive brushes. Eastern-European Journal of Enterprise Technologies. 2020. 6(1-108). R. 27-33. DOI: https://doi.org/10.15587/1729-4061.2020.212820. 4. Loskutov S.V., Pavlenko D.V., Gonchar N.V. [etc.]. The influence of fatigue and restorative heat treatment on the energy relief of the surface of gas turbine parts. Herald of engine construction. 2019. No. 1. P. 96-106. DOI: https://doi.org/10.15588/1727-0219-2019-1-12. 5. Honchar N., Kondratiuk E., Stepanov D., et. al. Estimation of temperature levels in the area of polishing with polymer-abrasive brushes. Advances in design, simulation and manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. 2019. №2. P. 95–103. DOI: https://doi.org/10.1007/978-3-030-22365-6_10. 6. Gonchar N.V., Trishin P.R. Complex assessment of factors affecting the dimensional wear of disc brush polymer-abrasive tools. Herald of dvigatelestroeniya. 2019. No. 1. P. 89–95. 7. Honchar N., Kachan O., Stepanov D., et. al. Measurement of Non-rigid Tools Action Force During Finishing. Springer International Publishing AG, part of Springer Nature 2019 V. Ivanov et al. (Eds.): DSMIE. 2018. LNME, R. 23–32. DOI: https://doi.org/10.1007/978-3-319-93587-4_3. 8. Honchar N., Tryshyn P., Pavlenko D., Stepanov D., Khavkina O. (2023). Model of influence of the machined material properties on wear of the polymeric-abrasive tool filaments. Strojnícky časopis-Journal of Mechanical Engineering. Vol. 73(1), (years 67-85).

1. Тришин П. Р., Гончар Н.В. Фінішінг каналу кутових хвилеводів поліруванням полімерно-абразивними щітками: монографія / Запоріжжя: НУ «Запорізька політехніка», 2023. – 135 с. 2. Особливості фінішної обробки складнопрофільних і тонкостінних авіаційних деталей щітковими полімерно-абразивними інструментами : монографія / Степанов Д.М., Гончар Н.В., Кондратюк Е.В., Тришин П.Р. – Запоріжжя : НУ «Запорізька політехніка», 2022. – 200 с.

1. Patent 156185 Ukraine, MPK V24V 1/00, V24V 29/00 (2024.01). Method of polishing rectangular waveguides on milling machines with numerical program control / P.R. Trishin, N.V. Gonchar, E.V. Kondratyuk. - No. u202304051; appl. 28.08.23; publ. 22.05.24, Bull. No. 21 2. Patent 152794 Ukraine, MKP V24V 29/00, B23Q 35/00. Machine for polishing the channel of rectangular waveguides / Trishin P.R., Gonchar N.V., Gembel I.Yu.; appl. 19.09.2022; publ. 12.04.2023. Bull. No. 15/2023. 3. Patent 152729 Ukraine, MKP V24V 1/00, V24V 29/00. Method of finishing the channel of sectional curved waveguides / Trishin P.R., Gonchar N.V., Kondratyuk E.V.; ​​appl. 08/17/2022; publ. 04/05/2023. Bull. No. 14/2023.

1. Gonchar N.V., Grebennikov M.O., Krivoruchenko V.L. Mechanization of the final stage of production of complex-profile parts of an aircraft engine / Comprehensive quality assurance of technological processes and systems (KZYATPS - 2024): materials of abstracts of the XIII International Scientific and Practical Conference, Chernihiv, May 23–24, 2024, NUCP. – Chernihiv: NU «Chernihiv Polytechnic», 2024. - T. 1. - P.166-167. 2. Gonchar N.V. Optimization of the technological process of manufacturing blades in conditions of single production of gas turbine engines // M.O. Grebennikov, V.L. Kryvoruchenko, A.G. Slobodyan // Comprehensive quality assurance of technological processes and systems (KZYATPS - 2023): materials of abstracts of the XIII International Scientific and Practical Conference, Chernihiv, May 25–26, 2023, NUCP. – Chernihiv: National University «Chernihiv Polytechnic», 2023. - T. 1. - P.218. 3. Trishin P.R., Gonchar N.V., Gembel I.Yu. Improvement of finishing of blades of compressor of aircraft engine. Proceedings of the 16th International scientific and practical conference «Modern science: innovations and prospects». 11-13 December 2022. SSPG Publish Stockholm, Sweden. 2022. Pp. 183-187.4. Tryshyn P.R., Honchar N.V., Stepanova A. Development of 3D metal printing in Ukraine The 6th International scientific and practical conference «Modern research in world science». Book of abstracts, 4-6 September 2022. – Lviv, Ukraine. – pp. 259–263. 5. Tryshyn, P.R., Honchar N., Stepanova A. Ways to improve the operating characteristics of radar systems Comprehensive quality assurance of technological processes and systems (KZYATPS – 2022). Materials of the abstracts of the XII International Scientific and Practical Conference, May 26–27, 2022 r. – Chernihiv – vol. 1. – p. 30. 6. Honchar N.V. Dual education and implementation of educational program tasks. Management of scientific and educational projects: materials of the All-Ukrainian scientific and pedagogical advanced training, January 24 - March 6, 2022. - Odesa: Helvetica Publishing House, 2022. - P. 330-331.