Frolov Mykhailo Volodymyrovych
Position
Head of the Department of Metal-Cutting Machine Tools and Instruments
Academic degree
Candidate of Technical Sciences
Academic title
Associate Professor
Education
Higher
- Higher education. Zaporizhzhia Machine-Building Institute, Faculty of Mechanical Engineering, graduated in 1984, with a diploma with honors, specialty according to the diploma – «Technology of mechanical engineering, metal-cutting machines and tools», qualification according to the diploma – «mechanical engineer»
Subjects taught
- Theory of cutting
- Mathematical modeling of cutting processes and metal-cutting tools
- Quality management
- Theory of 3D modeling
- Optimization of design solutions in mechanical engineering and numerical mathematical methods
- Mathematical statistics in scientific research
- Methodology of scientific research
Main languages of communication
Ukrainian, English (B2), French (A1).
Membership in organizations
-
member of the «International Association for Technological Development and Innovations»
Editorial activity
Main scientific works (publications):
-
M.Frolov. Variation Coefficient and Some Distribution Laws in the Context of Cutting Tools and Other Technical Objects Reliability Modeling (DOI 10.1007/978-3-319- 93587-4_2) In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham, 2018. – PP. 13-22 DOI: 10.1007/978-3-319-93587-4_2
-
Frolov, M., Tsyganov, V., Solokha, V. (2024). Empirical Data-Based Failure Rate Assessment Methodology for Metal-Cutting Tools. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Rauch, E., Piteľ, J. (eds) Advances in Design, Simulation and Manufacturing VII. DSMIE 2024. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-61797-3_17
-
Frolov M., Tanchenko S., Ohluzdina L. (2024). Parameter estimation of the Weibull distribution in modeling the reliability of technical objects. Journal of Engineering Sciences (Ukraine), Vol. 11(1), pp. A1–A10. https://doi.org/10.21272/jes.2024.11(1).a1
-
Dyadya, S., Frolov, M., Tanchenko, S., & Solokha, V. (2025b). Attendant free vibrations and assessment of their influence on the machined surface macrogeometry while end milling. In Lecture notes in mechanical engineering (pp. 327–337). https://doi.org/10.1007/978-3-031-95211-1_27
-
Dyadya, S., Frolov, M., Tanchenko, S., Solokha, V., & Yakhno, D. (2025b). Feed rate influence research on the machined surface waviness parameters in end up milling of Thin-Walled parts. In Lecture notes in networks and systems (pp. 79–89). https://doi.org/10.1007/978-3-031-95191-6_8
-
Frolov, M., Surkov, S., Tanchenko, S., Barycki, A., Solokha, V., & Shtankevych, V. (2025b). USE OF SHEWHART CONTROL CHARTS TO ENSURE PRODUCT QUALITY AND OPTIMIZE THE MAINTENANCE SCHEDULE FOR CNC METAL- CUTTING MACHINES. CASE STUDIES. New Materials and Technologies in Metallurgy and Mechanical Engineering, 2, 84–92. https://doi.org/10.15588/1607-6885- 2025-2-10
Total scientific works: 47, of which patents – 1, monographs – 1, textbooks – 1, abstracts of reports – 21, articles – 23.
List of all scientific publications by year in reverse chronological order:
-
Dyadya, S., Frolov, M., Tanchenko, S., & Solokha, V. (2025b). Attendant free vibrations and assessment of their influence on the machined surface macrogeometry while end milling. In Lecture notes in mechanical engineering (pp. 327–337).
-
Dyadya, S., Frolov, M., Tanchenko, S., Solokha, V., & Yakhno, D. (2025b). Feed rate influence research on the machined surface waviness parameters in end up milling of Thin-Walled parts. In Lecture notes in networks and systems (pp. 79–89).
-
Frolov, M., Surkov, S., Tanchenko, S., Barycki, A., Solokha, V., & Shtankevych, V. (2025b). USE OF SHEWHART CONTROL CHARTS TO ENSURE PRODUCT QUALITY AND OPTIMIZE THE MAINTENANCE SCHEDULE FOR CNC METAL- CUTTING MACHINES. CASE STUDIES. New Materials and Technologies in Metallurgy and Mechanical Engineering, 2, 84–92.
-
Frolov M.V., Tanchenko S.V., Shtankevich V.S. Shewhart maps as a tool for assessing the condition of equipment for creating a rational maintenance schedule. // Abstracts of reports of the scientific and practical conference, Zaporizhzhia, April 14–18, 2025 [Electronic resource] / Editor: Vadim SHALOMYEV (editor-in-chief) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2025. – 128 p. – 1 electronic opt. disk (DVD-ROM); 12 cm. – Title from the title. Screen
-
Tanchenko S.V., Frolov M.V., Smagin R.G. Choosing a reverse engineering method for forming an optimal layout layout // Abstracts of the scientific and practical conference, Zaporizhzhia, April 14–18, 2025 [Electronic resource] / Editor: Vadym SHALOMYEV (editor-in-chief) Electronic data. – Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2025. – 128 p. – 1 electronic opt. disk (DVD-ROM); 12 cm. – Title from the title. Screen
-
Tanchenko S.V., Frolov M.V., Vyshenko G.A. Investigation of the stress state of bending adaptation structures using the SAE system // Abstracts of the scientific and practical conference, Zaporizhzhia, April 14–18, 2025 [Electronic resource] / Ed.: Vadim SHALOMEEV (responsible editor) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2025. – 128 p. – 1 electronic opt. disk (DVD-ROM); 12 cm. – Title from the title. Screen
-
Frolov, M., Tsyganov, V., Solokha, V. (2024). Empirical Data-Based Failure Rate Assessment Methodology for Metal-Cutting Tools. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Rauch, E., Piteľ, J. (eds) Advances in Design, Simulation and Manufacturing VII. DSMIE 2024. Lecture Notes in Mechanical Engineering. Springer, Cham.
-
Frolov M., Tanchenko S., Ohluzdina L. (2024). Parameter estimation of the Weibull distribution in modeling the reliability of technical objects. Journal of Engineering Sciences (Ukraine), Vol. 11(1), pp. A1–A10.
-
M. Frolov, V. Tsyganov, V. Solokha. Empirical Data Based Failure Rate Assesment Methodology for Metal Cutting Tools / Design, Simulation, Manufacturing: The Innovation Exchange: Book of Abstracts of the 7-th International Conference, Pilsen, Czech Republic, June 4-7, 2024 / Vitalii Ivanov, Milan Edl (Eds.) – Pilsen, IATDI, 2024. – P.73
-
TSYGANOV V.V., FROLOV M.V. MODELING OF THE PLASTIC-DEFORMATION STATE OF THE CONTACT SURFACE DURING FRICTION // SCIENCE WEEK-2024. FACULTY OF MECHANICAL ENGINEERING. ABSTRACTS OF REPORTS OF THE SCIENTIFIC-PRACTICAL CONFERENCE, ZAPORIZHYA, APRIL 15–19, 2024 [ELECTRONIC RESOURCE] / EDITORIAL: VADIM SHALOMEEV (EDITORIAL EDITOR) ELECTRONIC DATA. – ZAPORIZHYA: NU «ZAPORIZHKA POLYTECHNIC», 2024. – 128 p.
-
FROLOV M., SOLOKHA V., TSYGANOV V. FAILURE RATE-BASED CRITERION FOR SELECTING A DISTRIBUTION LAW WHEN STUDYING THE RELIABILITY OF TECHNICAL OBJECTS.CASE STUDIES // SCIENCE WEEK-2024. FACULTY OF MECHANICAL ENGINEERING. ABSTRACTS OF THE SCIENTIFIC AND PRACTICAL CONFERENCE, ZAPORIZHJIA, APRIL 15–19, 2024 [ELECTRONIC RESOURCE] / EDITOR: VADYM SHALOMEEV (EDITOR) ELECTRONIC DATA. – ZAPORIZHJIA: NU «ZAPORIZHJIA POLYTECHNIC», 2024. – 128 p.
-
Frolov M., Solokha V., Tanchenko S. Failure Rate As A Criterion For Assessing The Distribution Law In The Engineering Object Reliability Evaluation. Case Studies / Innovative approaches to the progressive solution of scientific research problems» (xvі international scientific and practical conference, Valencia, Spain). – P.161 – 165, 2024
-
Frolov M.V., Tanchenko S.V. Determination of the minimum number of samples and time for zero-failure tests // Science Week-2023. Faculty of Mechanical Engineering. Abstracts of the scientific and practical conference, Zaporizhzhia, April 24–28, 2023 [Electronic resource] / Editor: Vadim SHALOMIEV (responsible editor) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2023. – 177p. – 1 electronic opt. disk (DVD-ROM); 12 cm. – Title from the title screen.
-
Frolov M.V., Nazarova K.O. Forecasting the failure distribution shape parameter of special bearings for aircraft engines when planning tests // Science Week-2023. Faculty of Mechanical Engineering. Abstracts of the scientific and practical conference, Zaporizhzhia, April 24–28, 2023 [Electronic resource] / Editor: Vadim SHALOMIEV (responsible editor) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2023. – 177p. – 1 electronic opt. disk (DVD-ROM); 12 cm. – Title from the title screen.
-
Tanchenko S.V., Frolov M.V., Notchenko R.V. Methodology for planning and conducting an experiment to study the positioning accuracy of a CNC machine tool model ATPR800.. 82 // Science Week-2023. Faculty of Mechanical Engineering. Abstracts of reports of the scientific and practical conference, Zaporizhzhia, April 24–28, 2023. [Electronic resource] / Editor: Vadim SHALOMIEV (editor-in-chief) Electronic data. – Zaporizhzhia: NU «Zaporizhzhia Polytechnic», 2023. – 177p. – 1 electronic opt. disk (DVD-ROM); 12 cm. – Title from the title screen.
-
Tanchenko S.V., Frolov M.V., Surkov S.Yu. Optimization of the maintenance and repair system of machine tools to increase the efficiency of equipment operation // Science Week-2023. Faculty of Mechanical Engineering. Abstracts of the scientific-practical conference, Zaporizhzhia, April 24-28, 2023. [Electronic resource] / Editor: Vadim SHALOMYEV (Responsible Editor) Electronic data. – Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2023. – 177p. – 1 electronic optical disc (DVD-ROM); 12 cm. – Title from the title screen.
-
Frolov, M. V. Methodological differences in planning experiments according to factorial and Taguchi plans / M. V. Frolov, P. V. Glushko // Science Week-2022. Abstracts of the Supplementary Scientific-Practical Conference, Zaporizhzhia, April 18-22, 2022. [Electronic resource] / Editor: V. V. Naumyk (Responsible Editor) Electronic data. – Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2022. – P.176 – 177
-
Frolov, M. V. Methodology for planning an experiment to study the influence of the thickness and number of layers in a nanostructured wear-resistant layer of a multilayer composite coating / M. V. Frolov, S. V. Tanchenko Scientific-practical Conf., Zaporizhzhia, April 18-22, 2022. [Electronic resource] / Editor: V. V. Naumyk (Responsible Editor) Electronic data. – Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2022. – P.178 – 179
-
Frolov, M. V. On the issue of demonstration tests with zero failures of metal-cutting tools in the absence of statistical data / M.V. Frolov, P.V. Glushko. // Science Week-2021, Faculty of Mechanical Engineering: Collection of Abstracts of the Annual Scientific-Practical Conference. Among students, teachers, scientists, young scientists and postgraduates (Zaporizhzhia, April 13–17, 2021) - Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2021. - P.46 – 48
-
Frolov, M. V. Modern approaches to the development and modernization of metalworking equipment / M. V. Frolov, I. A. Boyko, D. V. Demenko // Collection of scientific papers of the XI All-Ukrainian scientific and technical conference with international participation «Mechanical processing processes, machine tools and tools», November 5–6, 2021. - Zhytomyr: State University «Zhytomyr Polytechnic», 2021. - P. 76 - 78.
-
Frolov M., Zvilinsky S. In search of Hrytska Kernerenko. Genealogical detective. Historical truth. URL:
-
Frolov M., Zvilinsky S. In search of Hrytsko Kernerenko, person without a profession: A genealogical mystery - UJE - Ukrainian Jewish Encounter. UJE - Ukrainian Jewish Encounter.
-
Frolov, M. V. Development of software for shaping the involute profile of the gouge teeth based on the FANUC numerical control system [Text] / M. V. Frolov, A. V. Kraskovsky // Science Week-2020, Faculty of Mechanical Engineering: collection of abstracts of the additional annual scientific-practical conference among students, teachers, scientists, young scientists and postgraduates (Zaporizhzhia, April 13–17, 2020) - Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2020. - P.35 – 36
-
Frolov, M. V. Formation and level of reverse engineering in modern production conditions [Text] / M. V. Frolov, P. V. Glushko. // Science Week-2020, Faculty of Mechanical Engineering: collection of abstracts of the additional annual scientific-practical conference among students, teachers, scientists, young scientists and postgraduates (Zaporizhzhia, April 13–17, 2020) - Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2020. - P.46 – 48.
https://zp.edu.ua/uploads/dept_s&r/2020/conf/4.1/TN_2020-MF.pdf
-
Frolov M. Evaluation of distribution parameters for cutting tools reliability analysis [Text] / M.V. Frolov // Science Week-2019, Mechanical Engineering Faculty: collection of abstracts of the additional annual scientific-practical conference among students, teachers, scientists, young scientists and postgraduates (Zaporizhzhia, April 15–19, 2019) – Zaporizhzhia: Zaporizhzhia Polytechnic National University, 2019. - P.68 – 69
-
M.Frolov. Variation Coefficient and Some Distribution Laws in the Context of Cutting Tools and Other Technical Objects Reliability Modeling (DOI 10.1007/978-3-319- 93587-4_2) In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham, 2018. – PP. 13-22 DOI: 10.1007/978-3-319-93587-4_2
-
Terminological dictionary-reference book on tribology (Ukrainian, Russian, English): Textbook / V.O. Boguslaev, L.Y. Ivshchenko, V.I. Kubich, M.V. Frolov; edited by L.Y. Ivshchenko – Zaporizhzhia: PJSC «Motor Sich», 2019. – 218 p.
-
M.Frolov. Variation Coefficient and Some Distribution Laws in the Context of Cutting Tools and Other Technical Objects Reliability Modeling. Proceedings from: Design, Simulation, Manufacturing: The Innovation Exchange: Book of Abstracts of the International Conference, Sumy, Ukraine, June 12-15, 2018 / V.Ivanov, O.Liaposhenko, I.Pavlenko (Eds.). – Sumy, PF “Publishing House “University Book””, 2018. – P.62
-
Frolov M.V. use of Weibull laws and gamma distribution to describe the reliability of a cutting tool / M.V. Frolov // Science Week. Collection of abstracts of reports of the annual scientific and practical conference among students, teachers, scientists, young scientists and postgraduates. Electronic edition – Zaporizhzhia: ZNTU, 2017. - P.204 – 206
-
Frolov M.V. Approximation of the profile of a worm-slotted milling cutter by an involute circle / M.V. Frolov // Science Week. Collection of abstracts of reports of the annual scientific and practical conference among students, teachers, scientists, young scientists and postgraduates. – Zaporizhzhia: ZNTU, 2016. – vol.1 – p.133-134
-
Frolov M.V. Increasing the accuracy of worm slotted cutters by approximating the theoretical profile with the involute section of the circle / M.V. Frolov // Journal of Engineering Sciences. - Vol. 3, No. 2, 2016 - P. A15 - A19
-
Ivshchenko L.Y., Krestianikov O.I., Tsyganov V.V., Komochkin M.S., Frolov M.V. A device for the study of friction. Patent of Ukraine for a utility model No. 109250, 2016. Byul. No. 16
-
Ivschenko L.I Zaporizhzhya National Technical University / L.I.Ivschenko, G.V.Klymenko, V.Y.Klymenko, A.V.Glushko, M.V.Frolov // ENGITEC: achieved results, outcomes and recommendations: Monograph / S.E.Eshkabilov (Ed.) - Dnipropetrovsk: Driant, 2015. – P.29 – 40.
-
Frolov M.V. Estimation of force dependences during turning with cutters with round plates by means of «equivalent» parameters. // New materials and technologies in metallurgy and mechanical engineering. - No. 1, 2015 – P.53-56
-
Frolov M.V. The influence of the properties of lubricating materials on the intensity of wear of the sliding friction pair / M.V. Frolov, A.A. Ekimov // Theoretical and practical problems of creating aviation engines and power plants. Abstracts of reports of the international scientific and technical conference. - Zaporizhzhia, Motor Sich JSC. - 2014. - P.112-114
-
Ivshchenko L.I. Structural self-organization of tribo-coupled parts in the conditions of complex thermodynamic loading / L.I. Ivshchenko, V.V. Tsyganov, M.V. Frolov // Herald of ChDTU. Series: Technical sciences. – No. 3, 2012. – P.5 – 11.
-
Solokha V.V. Reducing the influence of thermal deformations on machining accuracy on lathes / V.V. Solokha, V.S. Lilichenko, M.V. Frolov // New materials and technologies in metallurgy and mechanical engineering. - No. 2, 2011. – P.69 – 73.
Participation in conferences:
-
I International Conference Smart Innovations in Energy and Mechanical Systems - SIEMS-2025, Zaporizhzhia, Ukraine
-
VIII International Conference Design, Simulation, Manufacturing: The Innovation Exchange – DSM:IE-2025, Porto, Portugal
-
VII International Conference Design, Simulation, Manufacturing: The Innovation Exchange – DSM:IE-2024, Plzen, Czech Republic
-
XVII INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE «Innovative Approaches to the Progressive Solution of Scientific Research Problems», Valencia, Spain
-
I International Conference Design, Simulation, Manufacturing: The Innovation Exchange – DSM:IE-2018, Sumy, Ukraine
-
I International Conference Design, Simulation, Manufacturing: The Innovation Exchange – DSM:IE-2018, Sumy, Ukraine
-
M.Frolov. Variation Coefficient and Some Distribution Laws in the Context of Cutting Tools and Other Technical Objects Reliability Modeling (DOI 10.1007/978-3-319-93587-4_2) In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing. DSMIE 2018. Lecture Notes in Mechanical Engineering. Springer, Cham, 2018
-
Frolov M.V. Increasing the accuracy of worm spline cutters by approximating the theoretical profile with a section of an involute of a circle / M.V. Frolov // Journal of Engineering Sciences. – Vol. 3, No. 2, 2016 – P. A15 – A19
-
Ivschenko L.I Zaporizhzhya National Technical University / L.I.Ivschenko, G.V.Klymenko, V.Y.Klymenko, A.V.Glushko, M.V.Frolov // ENGITEC: achieved results, outcomes and recommendations: Monograph / S.E.Eshkabilov (Ed.) - Dnipropetrovsk: Driant, 2015. – P.29 – 40.
-
...
-
List of all conferences attended by year
Honors and awards:
-
Award for the best scientific work and its presentation at the DSMIE 2025 conference (2025)
-
Gratitude for the high level of review of works at the international conference DSMIE 2025 (2025)
-
Gratitude of the rector for participation in the Program Committee of the SIEMS 2025 conference (2025)
-
Gratitude for leading the session at the international conference DSMIE 2025 (2025)
-
Gratitude for developing the image and business reputation of the university and active participation in career guidance work (2024)
-
Gratitude for participating in the review of the 2nd stage of the all-Ukrainian creative competition «Processes and equipment of Machine-Building Industries» (2024)
-
Gratitude of the Zaporizhzhia Regional State Administration (2023)
-
Letter of gratitude of the Executive Committee of the Zaporizhzhia City Council (2022)
-
Gratitude of the Ministry of Education and Science (2022)
-
Badge «For impeccable work» of the 2nd degree (2020)
-
Honorary Diploma of the Department of Education and Science of the Zaporizhzhia Regional State Administration (2016)
Year of beginning of activity at the university: 1984.
Contacts
Address:
69011, Ukraine, Zaporizhzhia, 64 Universytetska St.
Classroom:
151
Phone:
e-mail:
Moodle Profile:
